Image 1 of 13
Image 2 of 13
Image 3 of 13
Image 4 of 13
Image 5 of 13
Image 6 of 13
Image 7 of 13
Image 8 of 13
Image 9 of 13
Image 10 of 13
Image 11 of 13
Image 12 of 13
Image 13 of 13
TooHighPsi Billet 2650 Supercharger Lid
TooHighPsi Billet Supercharger Lid for Magnuson TVS2650
Make room for port injection & let that 2650 sing…
The massive 2650 blower from Magnuson is an amazing supercharger, but the team at TooHigh PSI have a few tricks to make it even better! In this case, it is the beautiful low-profile all billet lid that brings 4 distinctive benefits to the build.
Why you need this…
Gives your ZL1 and C7 Z06 a lower profile lid option for those who plan to use the TooHigh PSI port injection system which raises the blower.
Choose raw aluminum or anodized black, red, or blue, with your choice of a blank badge or one of the listed engravings. These also allow you to color coordinate with the TooHigh PSI valve covers, Thermostat Housing, Belt Slayer Kit, and LT5 Tensioner Bracket for an easy way to dress up your engine bay.
These lids not only look great, but they also provide a 3 pound weight savings over the factory supplied Magnuson Cast Lid.
Too High PSI spared no expense with some beautiful pre-installed O-ring seals on the bottom of the lid.
BONUS: As you will see below Griffin Motorsports now also offers two ARP hardware options for those who want the best looking fasteners on the market!
Why This Design Works…
Although installing the TooHigh PSI Port injection system adds unwanted height below the supercharger, TooHighPsi was smart enough to take height out above it by machining a lower-profile lid. That matters most when you want the extra fueling hardware and plan to keep the factory hood.
Even with the lower exterior profile, TooHighPsi reports 7% more area above the supercharger outlet port compared with the cast Magnuson lid. The billet design also removes the thick external ribs of the cast lid to help gain clearance and lose weight. TooHighPsi attributes a lot of the more pronounced blower whine to that design change alone.
Specifications & Options…
Material — CNC-machined 6061-T6 aluminum from U.S.-sourced stock
Manufacturing — Machined in-house by TooHighPsi in the USA
Lid Finishes — Raw aluminum or anodized black, red, or blue
Badge Colors — Black, red, or blue
Standard engravings — Options include TooHighPsi, Supercharged, LT4 Supercharged, ZL1 Supercharged, and V-Series
ARP 12-point Hardware - GMS Offers the first and only set of matching ARP hardware for the full suite of Too High PSI valve covers, coil packs and lids. Whether you like polished SS or the matte finish from the black oxide, we have you covered.
Fitment & Installation…
Fits the Magnuson Magnum Series TVS2650 in GM LTx and Dodge/Jeep HEMI configurations.
TooHighPsi identifies the sixth-gen Camaro ZL1 and C7 Corvette Z06 as factory-hood applications with its low-profile port injection plates. Its KATANA plate guide also specifies this billet lid for those two Magnuson applications when keeping the factory hood.
Match the lid to the supercharger installed on the car. If you’re using different port plates, an aftermarket hood, or a modified mounting setup, check the assembled height and hood clearance before closing the hood.
Follow the applicable lid installation procedure and hardware specifications. Confirm seal seating during assembly.
GMS Take…
If you’re planning an LT4 2650 build with or without port injection, give us a call and let’s discuss the options to help make sure your combination works well, and looks even better!
Most Too High PSI products ship directly from the manufacturer.
TooHighPsi Billet Supercharger Lid for Magnuson TVS2650
Make room for port injection & let that 2650 sing…
The massive 2650 blower from Magnuson is an amazing supercharger, but the team at TooHigh PSI have a few tricks to make it even better! In this case, it is the beautiful low-profile all billet lid that brings 4 distinctive benefits to the build.
Why you need this…
Gives your ZL1 and C7 Z06 a lower profile lid option for those who plan to use the TooHigh PSI port injection system which raises the blower.
Choose raw aluminum or anodized black, red, or blue, with your choice of a blank badge or one of the listed engravings. These also allow you to color coordinate with the TooHigh PSI valve covers, Thermostat Housing, Belt Slayer Kit, and LT5 Tensioner Bracket for an easy way to dress up your engine bay.
These lids not only look great, but they also provide a 3 pound weight savings over the factory supplied Magnuson Cast Lid.
Too High PSI spared no expense with some beautiful pre-installed O-ring seals on the bottom of the lid.
BONUS: As you will see below Griffin Motorsports now also offers two ARP hardware options for those who want the best looking fasteners on the market!
Why This Design Works…
Although installing the TooHigh PSI Port injection system adds unwanted height below the supercharger, TooHighPsi was smart enough to take height out above it by machining a lower-profile lid. That matters most when you want the extra fueling hardware and plan to keep the factory hood.
Even with the lower exterior profile, TooHighPsi reports 7% more area above the supercharger outlet port compared with the cast Magnuson lid. The billet design also removes the thick external ribs of the cast lid to help gain clearance and lose weight. TooHighPsi attributes a lot of the more pronounced blower whine to that design change alone.
Specifications & Options…
Material — CNC-machined 6061-T6 aluminum from U.S.-sourced stock
Manufacturing — Machined in-house by TooHighPsi in the USA
Lid Finishes — Raw aluminum or anodized black, red, or blue
Badge Colors — Black, red, or blue
Standard engravings — Options include TooHighPsi, Supercharged, LT4 Supercharged, ZL1 Supercharged, and V-Series
ARP 12-point Hardware - GMS Offers the first and only set of matching ARP hardware for the full suite of Too High PSI valve covers, coil packs and lids. Whether you like polished SS or the matte finish from the black oxide, we have you covered.
Fitment & Installation…
Fits the Magnuson Magnum Series TVS2650 in GM LTx and Dodge/Jeep HEMI configurations.
TooHighPsi identifies the sixth-gen Camaro ZL1 and C7 Corvette Z06 as factory-hood applications with its low-profile port injection plates. Its KATANA plate guide also specifies this billet lid for those two Magnuson applications when keeping the factory hood.
Match the lid to the supercharger installed on the car. If you’re using different port plates, an aftermarket hood, or a modified mounting setup, check the assembled height and hood clearance before closing the hood.
Follow the applicable lid installation procedure and hardware specifications. Confirm seal seating during assembly.
GMS Take…
If you’re planning an LT4 2650 build with or without port injection, give us a call and let’s discuss the options to help make sure your combination works well, and looks even better!
Most Too High PSI products ship directly from the manufacturer.